BetaFPV LiteRadio 3 Pro Radio Transmitter - ELRS (Supports External Nano TX Module)

BetaFPV LiteRadio 3 Pro Radio Transmitter - ELRS (Supports External Nano TX Module)

Out of Stock

Only left for same day shipping. Order now!
Earn
BetaFPV LiteRadio 3 Pro Radio Transmitter - ELRS (Supports External Nano TX Module)
The BetaFPV  LiteRadio 3 Pro Radio Transmitter is an open-source radio remote control that supports the EdgeTX system.

About this product

The BetaFPV  LiteRadio 3 Pro Radio Transmitter is an open-source radio remote control that supports the EdgeTX system. It comes with hall gimbals, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. The OLED display screen on the top of the transmitter brings visually instant data and a controlling interface to users. What's more, two optional internal RF systems and alternative external nano TX module make it a multi-protocol transmitter.

VIDEO: New - BETAFPV LiteRadio 3 Pro - Overview

Features

  • LiteRadio 3 Pro is a new milestone for LiteRadio Series so far. It is an open-source radio transmitter with the EdgeTX system. Therefore, you can try your best to customize it with the EdgeTx system.
  • Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Highly recommend BETAFPV ELRS Nano TX Module and other brands of nano TX modules are also available.
  • A 1.3-inch OLED display screen is newly installed. Controlled by two 5D buttons and settings are easy to be adjusted directly from the display screen.
  • Built-in 2000mAh 1S battery, LiteRadio 3 Pro can work up to 15 hours without an external module, bringing an excellent endurance performance.
  • Hall gimbal features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel.
  • Internal ELRS TX module up to 250mW output power enables LiteRadio 3 Pro to excellently adapt its controlling range
  • Mode 2 (Left Stick Throttle)

LITERADIO COLLECTIONS

Literadio 3 Pro radio transmitter is greatly enhanced its internal ELRS module output power up to 250mW, which enables LiteRadio 3 Pro to excellently adapt its controlling range. Reserving a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc. Besides, the OLED display screen and operating system are newly added to it for better usability.

EDGETX SUPPORTED

LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system, which is an open-source firmware for RC radio transmitters. The firmware is highly configurable and brings much more features than traditional radios. Therefore, you can try your best to customize LiteRadio 3 Pro such as language, voice and etc with the EdgeTX system.

OLED DISPLAY SCREEN

OLED display screen with two 5D buttons is newly added to LiteRadio 3 Pro radio transmitter. Users can adjust the TX settings such as switching internal/external modules, gimbal calibration, and binding on the screen by controlling 5D buttons. Compared with LiteRadio 3, it is easier to adjust such settings and very friendly to a new player.

EDGETX PASSTHROUGH FOR ELRS UPGRADE

With EdgeTX operating system, flashing ExpressLRS internal TX modules is easier for everyone. First, there is no need to disassemble the case. Compared with upgrading by WIFI, it is more convenient, fast, and stable to flash ELRS internal TX firmware by using EdgeTX passthrough flashing.

EXTERNAL TX MODULE

Nano module bay enables the external TX module available. LiteRadio 3 Pro reaches a high level with its capability to support multi-brand external TX modules in the market for different protocols such as MULTI, CRSF, PPM, XJT, DSM2, and R9M, etc. BETAFPV ELRS Nano TX Module, which features a high refresh rate, ultra-low latency, and long-range, is strongly recommended for LiteRadio 3 Pro.

HALL GIMBAL

Features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. With an adjustable stick end, it perfectly fits thumbs and greatly improves the stick feel for the control. Hall Effect provides contactless sensing for not only accurate control inputs and precise centering but also durable use.

Specifications

  • USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G)
  • RF Output Power: 50mW, 100mW, 250mW (ELRS 2.4G) / 100mW (CC2500)
  • Protocol Option: ExpressLRS 2.4G / CC2500 (Frsky D, Frsky X, SFHSS)
  • Port: Type-C USB 3.0 port / 3.5mm Audio port
  • Item: LiteRadio 3 Pro Radio Transmitter
  • Screen: 1.3 inch OLED display screen
  • Battery: Built-in 2000mAh 1S Battery
  • Mode: Mode 2 (Left Stick Throttle)
  • RF System: SX1280 / CC2500
  • Operating system: EdgeTX
  • Antenna: Internal Antenna
  • Frequency Range: 2.4G
  • Channel: 8 Channels
  • Gimbal: Hall Sensor

Includes

  • 1x BETAFPV LiteRadio 3 Pro Radio Transmitter - ELRS
  • 1x Screen Protector
  • 1x User Manual
 

More Information

SKU 18001
UPC (GTIN) 764613345728
Manufacturer BETAFPV
NDAA Compliant No
Frequencies 2.4GHz
Item Returns This item can be returned

Also Purchased

BETAFPV ELRS 2.4GHz Micro TX Module - 1W
$49.99